Gaoxin Industrial Park,Guangming New Zone,Shenzhen City, Guangdong Province, China | Angelwang66@126.com |
Place of Origin: | CHINA |
Model Number: | POE-A15008 |
Transmission Rate: | 10M/100Mbps |
---|---|
Protocol Standard: | Non-IEEE802.3 |
Delivery Time: | 3-30days |
---|
POE SWITCHING POWER ADAPTER
POE-A15008
Why choose 15V POE power adapter?
Most powered device require 12V power supply, the voltage of the supplying power will be drop at a distance of transmission via network cable. Usually, the voltage will drop to lower than 12V after over 10 meters delivering via network cable, which is just satisfied for AP working regularly. When the POE is 12V, the AP will be not in regular working due to under-voltage, on the contrary, the over-voltage will hit the device. So, taking all into account, 15V will be more appropriated especially for the powered device connected over 10meters far away.
POE-A15008
General Specification:
Model:POE-A15008
Input:AC100-240V, 50-60Hz
Output:DC15V, 0.8A; 12W
Key Feature:
1. Good anti-interference performance (Strong resistance of interference), high reliability
2. Low DC ripple, high efficiency, low standby power consumption, lower heating value (calorific value), natural cooling, long service life
3. Broad input voltage range (100-240VAC), conform to multinational use standard.
4. Excellent insulating performance, higher dielectric strength (intensity)
5. Good load capacity, constant current & constant voltage, wider adaptive range, over-voltage protection for input and output, short-cut protection, over-current protection.
6. The shell is made of flame resisted engineering plastic, which greatly improve the equipment using safety
7. Transmission Distance/Operating Distance: Max.100 meters (CAT 5 or better cable). It specifically depends on the quality of network cable, supply voltage and adaptability of power device for voltage. The higher quality of network cable, the voltage drop will be less, and the effective power distance will be further accordingly.
INPUT CHARACTERISTICS:
Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)
Input Current: Max. 2.0Amps AC input at any input voltage below the rated value and DC output full load.
Inrush Current: Max. 30Amps cold start at 240VAC input, with rated load and 30℃ ambient output.
Ac Leakage Current: Max. 3.5mA at 240VAC input.
No Load Test 0A
Full Load Test 0.8A
Over Load Test 1A
OUTPUT CHARACTERISTICS:
Output Power:
Voltage |
Min. Load |
Max. Load |
Peak Current |
Output Power |
15 VDC |
0 A |
0.8 A |
1.0-1.2 A |
12.2 W |
Loading Characteristics/Regulation:
Voltage |
Min. No-Load Voltage |
Max. No-Load Voltage |
Line Regulation |
Load Regulation |
15 VDC |
15.0 V |
15.28 V |
±3% |
±5% |
Technical Specification
Input Voltage/Frequency |
AC100-240V; 50-60Hz |
Input Adjusting Range |
AC90-264V; 47Hz~63Hz |
Output Voltage/Current |
15VDC, 0.8A; 12W |
Output Voltage Regulation |
-15VDC±2% |
Load Regulation |
-15VDC±1% |
DC Output Broadband Noise Voltage |
3.4kHz~150kHz ≤50mv |
Network Port Mark |
Data&Power Out=Power pin (4/5 “+” & 7/8 “-”) + Data pin (12/36) Data In=Data pin (12/36) |
Transmission Rate |
10M/100Mbps |
LED Power Indicator |
Green or Blue Color; Indicator On: Power in normal working condition; Indicator Off: Power supply failure; Note: When the power in normal working condition, after connecting network cable, the indicator off means it’s in over-load protection or shortcut status, it should be the requiring power of powered device is too high, network cable is shortcut or the powered device is broken. |
System Reliability |
MTBF>100khours |
Environmental Requirement |
1. Operating Temperature: -10℃~40℃ (Full load, Normal operation) |
2. Storage Temperature: -20℃to85℃, with shell. |
|
3. Relative Humidity: 5%(0℃) ~ 90%(40℃) RH 72Hrs, Full load Normal operation. |
|
4. Operating and Storing Place: Ventilation and heat dissipation, Clean, No conductive dust, No corrosive gas |
|
5. Place of No dangerous of explosion |
|
Safety Assurance |
Conducted Emission(CE) and Radiated Emission(RE) compliant with EN60950, CE, FCC standard |
Dimension/Weight |
83.5mm×47mm×53.7mm; 85g |
Power Plug Specs |
EU/US/UK/AU Plug are available |
Lightning Protection |
AC Input can stand 5 times positive & negative 5KV, 8/20uS instantaneous current wave, lasting 1 minutes each time. The lightning protection circuit of the power adapter have invalidation alarming function and protective components like glass protective tube |
Application |
This is ordinary switching power supply, great protective performance, superior stability and adaptability connecting with power device, its scope of application include security surveillance, wireless access point, electrical machine, communication equipment, health care products and those POE supported equipment. |
Warranty |
One year |
Contact Person: Miss. Angel
Tel: 1598940345
Fax: 86-755-3697544
Black Plastic 3FF Micro To Normal SIM Adapter , Micro 500pcs In A Polybag
Standard Plastic ABS Micro To Normal SIM Adapter For Cell Phone
Hot Selling Micro Sim to Standard Sim Adapter For Normal Mobile
Plastic ABS Nano SIM Adapter , IPhone 4 Nano SIM Card Adaptor
Black IPhone 5 Nano SIM Adapter With Nano 4FF - 3FF
Unique IPhone5 Nano SIM Adapter Plastic ABS Nano To Mini Card
4FF - 3FF SIM Adapter , Nano To Micro Sim Adaptor 500pcs In A Polybag
Plastic ABS 3FF Micro SIM Adapter For IPhone 4 Or IPhone 5
Nano Plastic 2 In 1 Combo Micro SIM Adaptor For IPhone 5 1.2 x 0.9cm