Gaoxin Industrial Park,Guangming New Zone,Shenzhen City, Guangdong Province, China
Home ProductsConstant Current Led Driver

Multifunction 1-10V Dimmable LED Driver 50W PUSH 1050mA , LED Panel Light Driver

Multifunction 1-10V Dimmable LED Driver 50W PUSH 1050mA , LED Panel Light Driver

  • Multifunction 1-10V Dimmable LED Driver 50W PUSH 1050mA , LED Panel Light Driver
  • Multifunction 1-10V Dimmable LED Driver 50W PUSH 1050mA , LED Panel Light Driver
Multifunction 1-10V Dimmable LED Driver 50W PUSH 1050mA , LED Panel Light Driver
Product Details:
Place of Origin: China
Brand Name: Merrytek
Certification: SEMKO /CE
Model Number: ML50C-PV1
Payment & Shipping Terms:
Minimum Order Quantity: 100Pcs
Price: Negotiation
Packaging Details: Packed in bubble bag firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit.
Payment Terms: T/T, Western Union
Supply Ability: 10,000pcs per month
Contact Now
Detailed Product Description
Approvals: SEMKO /CE Working Temperature: -25℃-50℃
Output Current: 350mA-1050mA, Selectable Via DIP Switch Output Voltage: 68Vdc Max.
Input Voltage: 220-240Vac Dimming Mode: 1-10V, PUSH
Output Load: 1x50W Max Isolation Class: Class I
Efficiency: ≥85% Protection Class: IP20
High Light:

led dimming driver

,

led dimmer driver

1-10V Dimmable LED Driver 50W PUSH 1050mA , LED Panel Light Driver

 

 

Description:

1, Press-in type terminal blocks for input and output side, very easy to installation.

2, DIP switch design is for different current and voltage selecting, maximum current up to 1050mA. Different LED light can chose the same model LED driver, save cost for purchasing and inventory management.

3, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface.

4, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.

5, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

6, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

7, Maximum length of the cable, from switch to last driver is 20m.

8, Factory setting: 100% dimming level and 350mA output.

9, Reset the LED diver easily by a jumper.

10, Press-in terminals in primary and secondary side, easy assembly.

11, Protection: Short circuit / Over voltage / Over temperature.

12, Long life span 50,000h, 5 years guaranty.

 

Applications:

For LED panel light, LED down light, led strip, led tube etc…

 

Dimming Operation:

 

A) PUSH Dim

Short push (<0.1sec): Ignore, to avoid reaction on AC spike.

Short push (0.1~1sec): Switch on or switch off.

Long push (>1sec): Dimming up or down, dimming level automatically stops at minimum or maximum value.

 

B) 1-10V Dim

Using the push dimming will make 1-10V dimming inactivated. The driver has to be reset to active the 1-10V dimming function again.

 

Synchronization:

 

For the resynchronization to work correctly when more than one driver is connected to the same push button, follow steps of below after the drivers are connected:

 

A) Press push button for more than one second, followed by a short push (<1s), now, led light switches off.

B) Do a long push, the system will be resynchronized.

 

Specifications

 

 

 

INPUT

 

Input voltage

220-240Vac

Input frequency

50-60Hz

Input current

0.26A max

Power factor

≥0.90

Efficiency(Note1)

≥87%

Leakage current

<0.5mA/240Vac

 

 

 

OUTPUT

 

Output current/voltage and load

350mA 16-60V DC 21W max  500mA 16-60V DC 30W max

550mA 16-60V DC 33W max  650mA 16-58V DC 41W max

700mA 16-58V DC 41W max  750mA 16-56V DC 43W max

850mA 16-56V DC 47W max  900mA 16-56V DC 50W max

1050mA 16-48V DC 50W max 12Vdc 0-1050mA 12.6W max

24Vdc 0-1050mA 25.2W max

Output load range

1x50W max

Current accuracy

±5%

Dimming mode

1-10V, PUSH

 

 

ENVIRONMENT

 

Working temp.(Ta)

-20~50℃

Surface temp.(Tc)

85℃max

Working humidity

20~90%RH non-condensing

Storage temp.

-40~80℃

Life time

≥50000hours

 

 

PROTECTION

 

Isolation class

Class I, SELV

Protection class

IP20

Short circuit

Protection type; auto rest

Over voltage

Protection type; auto rest

Over temperature

Protection type; auto rest

 

 

SAFETY&EMC

 

Safety

EN61347-1, EN61347-2-13, EN60598-1, EN60598-2-6

EMC

EN55015, EN61000-3-2ClassC

EN61000-3-3, EN61547

Approvals

SEMKO, CE

Withstand voltage

IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min

OUT-FG:500VAC/5mA/1min

 

NOTE

1, Efficiency is measured at 1050mA/48Vdc output set by DIP switch 

2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp.

 

 

Contact Details
Shenzhen YONP Power Co.,Ltd

Contact Person: Miss. Angel

Tel: 1598940345

Fax: 86-755-3697544

Send your inquiry directly to us (0 / 3000)

Other Products