Home Products Constant Voltage Led Driver

Dimmable 1-10V 350mA - 900mA LED Driver 40W With Memory Function

Product Details:

Place of Origin:	China
Brand Name:	Merrytek
Certification:	CE
Model Number:	ML40C-PV1

Payment & Shipping Terms:

Minimum Order Quantity:	100Pcs
Price:	Negotiation
Packaging Details:	Packed in bubble bag firstly, and then reinforced with carton for outer packing
Delivery Time:	1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit.
Payment Terms:	T/T, Western Union
Supply Ability:	10,000pcs per month

Contact Now

Detailed Product Description

Product Name:	1-10V /Push Dimming Led Driver	Dimming Mode:	1-10,Push
Input Voltage:	220-240Vax	Output Current:	350mA-900mA Selectable Vai DIP Switch
Working Temperature:	-25℃-50℃	Isolation Class:	Class II
Approvals:	CE	Protection Class:	IP20
Oupt Load Range:	40W Max
High Light:	led lighting driver , led light driver

1-10V Push 40W 350mA - 900mA Dimmable LED Driver for LED panel light

Description:

1, Press-in terminals in primary and secondary side, easy assembly.

2, Long life span 50,000h, 5 years guaranty.

3, with 1-10V and push in PRI and SEC side.

4, no flickering from 0%-100% dimming level

5,The output currents from 350mA to 900mA. It can be set by DIP swiches.

6, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.

7, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

8 Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

9, Maximum length of the cable, from switch to last driver is 20m.

10, Factory setting: 100% dimming level and 350mA output.

11, Reset the LED diver easily by a jumper.

12, Protection: Short circuit / Over voltage / Over temperature.

Dimming Operation:

A) PUSH Dim

Primary and secondary dimming with PUSH button. It has dimming level memory at main rstore. And the push dim is alway prior.

B) 1-10V Dim

Using the push dimming will make 1-10V dimming inactivated. The driver has to be reset to active the 1-10V dimming function again.

Synchronization:

For the resynchronization to work correctly when more than one driver is connected to the same push button, follow steps of below after the drivers are connected:

A) Press push button for more than one second, followed by a short push (<1s), now, led light switches off.

B) Do a long push, the system will be resynchronized.

Specifications

INPUT	Input voltage	220-240Vac
	Input frequency	50-60Hz
	Input current	0.20A max
	Power factor	≥0.90
	Efficiency(Note1)	≥86%
	Leakage current	＜0.5mA/240Vac
OUTPUT	Output current/voltage and load	350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 700mA 16-58V DC 41W max 900mA 16-56V DC 50W max
	Output load range	1x50W max
	Current accuracy	±5%
	Dimming mode	1-10V, PUSH
ENVIRONMENT	Working temp.(Ta)	-20~50℃
	Surface temp.(Tc)	85℃max
	Working humidity	20~90%RH non-condensing
	Storage temp.	-40~80℃
	Life time	≥50000hours
PROTECTION	Isolation class	Class I, SELV
	Protection class	IP20
	Short circuit	Protection type; auto rest
	Over voltage	Protection type; auto rest
	Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1, EN61347-2-13, EN60598-1, EN60598-2-6
	EMC	EN55015, EN61000-3-2ClassC
	EMC	EN61000-3-3, EN61547
	Approvals	SEMKO, CE
	Withstand voltage	IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min
	Withstand voltage	OUT-FG:500VAC/5mA/1min
NOTE	1, Efficiency is measured at 1050mA/48Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp.