| Gaoxin Industrial Park,Guangming New Zone,Shenzhen City, Guangdong Province, China | Angelwang66@126.com |
 |
| Place of Origin: | China |
| Brand Name: | Enargy |
| Model Number: | XX60-24S24-PEC |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Price: | Negotiation |
| Delivery Time: | 1-8 Weeks |
| Payment Terms: | Negotiation |
| Supply Ability: | 15000Pcs/week |
| High Light: | industrial power supplies,isolated power supply |
||
|---|---|---|---|
Industrial Power Supply 60W Output 24V/2.5A XX60-24S24-PEC
Key Features
Output power: 60W
Input range: 18-36VDC
High conversion efficiency: Up to 92%
Line regulation to ±1%
Load regulation to ±1%
Fixed operating frequency
Isolation Voltage :1500V
Enable (On/Off) Control
Output over-load protection
Hiccup mode short circuit protection
Input under-voltage lock-out
Output voltage trim: -8～+10% Vout
Product Overview
These DC-DC converter modules use advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High frequency switching provides high power density with low noise and high efficiency.
Electric Characteristics
Electrical characteristics apply over the full operating range of input voltage, output load and base plate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the base plate.
Absolute maximum ratings
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Input Voltage |
|
|
40 |
Vdc |
Continuous, non-operating |
|
|
|
38 |
Vdc |
Continuous, operating |
|
|
|
|
40 |
Vdc |
Operating transient protection,<100mS |
|
|
Isolation voltage |
|
|
2000 |
Vdc |
Input to output |
|
Operating Temperature |
-40 |
|
100 |
℃ |
|
|
Storage Temperature |
-65 |
|
125 |
℃ |
|
|
Enable to –Vin Voltage |
-0.5 |
|
15 |
Vdc |
|
Input Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Input voltage range |
18 |
24 |
36 |
Vdc |
Continuous |
|
Under-Voltage Lockout |
|
17.5 |
17.9 |
Vdc |
Turn - On threshold |
|
15.0 |
16.5 |
|
Vdc |
Turn - Off threshold |
|
|
Maximum Input Current |
|
|
4.1 |
A |
Full load, Min. input |
|
Efficiency |
90 |
|
|
% |
Rated input voltage, rated load |
|
Recommend External Input Capacitance |
|
100 |
|
uF |
Typical ESR 0.1-0.2W |
Output Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Output Voltage Set point |
23.76 |
|
24.24 |
Vdc |
Nominal input; Half load;25℃ |
|
Output Voltage Range |
23.52 |
|
24.48 |
Vdc |
|
|
Output Current Range |
0 |
|
2.5 |
A |
Subject to thermal derating |
|
Line Regulation |
|
±0.02 |
±1 |
% |
Low line to high line; full load |
|
Load Regulation |
|
±0.02 |
±1 |
% |
No load to full load; nominal input |
|
Current limit |
2.75 |
|
4.50 |
A |
Output voltage 90% of nominal |
|
Ripple (RMS) |
|
|
30 |
mV |
Nominal input; full load; 20 MHz bandwidth |
|
Noise(Peak-to-Peak) |
|
|
240 |
mV |
|
|
Maximum Output Cap. |
|
|
1800 |
μF |
Nominal input; full load |
|
Output Voltage Trim |
|
|
±8 |
% |
Nominal input; full load; 25°C |
Dynamic Response Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Change in Output Current (di/dt= 0.1A/us) |
|
|
480 |
mV |
50% to 75% to 50% Iout max |
|
Change in Output Current (di/dt= 2.5A/us) |
|
|
480 |
mV |
50% to 75% to 50% Iout max |
|
Settling Time |
|
|
300 |
uS |
To within 1% Vout nom. |
|
Output voltage overshoot |
|
|
5 |
% |
|
Functional Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Switching Frequency |
180 |
200 |
230 |
KHz |
Regulation stage and Isolation stage |
|
Trim(Pin6) |
See part 6.2 Voltage Trim(Pin6) |
||||
|
Output Voltage Trim |
|
|
8 |
% |
Trim Up, Trim Pin to (-) Vout. |
|
|
|
8 |
% |
Trim Down, Trim Pin to (+) Vout. |
|
|
Enable(ON/OFF)Control(Pin1) |
See part 6.1 |
||||
|
Enable Voltage Enable Source Current |
|
|
15 |
Vdc |
Enable pin floating |
|
|
|
1 |
mA |
|
|
|
Enable (On - Off Control) Positive Logic |
1.0 |
|
15 |
Vdc |
On–Control, Logic high or floating |
|
-0.5 |
|
0.3 |
Vdc |
Off–Control, Logic low |
|
|
Short – Circuit Protection |
|
|
10 |
mΩ |
Type: Hiccup Mode, Auto Recovery, Short–Circuit Resistance |
Isolation Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Isolation Voltage |
1500 |
|
|
Vdc |
Input to Output |
|
1500 |
|
|
Vdc |
Input to Base |
|
|
500 |
|
|
Vdc |
Output to Base |
|
|
Isolation Resistance |
100 |
|
|
MΩ |
At 500VDC to test it when atmospheric pressure and R.H. is 90% |
|
Isolation Capacitance |
|
1000 |
|
pF |
|
General Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Weight |
|
2.4(68) |
|
Oz (g) |
Encapsulated |
|
MTBF ( calculated ) |
250 |
|
|
KHrs |
TR-NWT-000332; 80% load,300LFM, 40℃ Ta |
Environmental Characteristics
|
Parameter |
Min |
Typ |
Max |
Units |
Notes |
|
Operating Temperature |
-40 |
|
+100 |
℃ |
Extended, base PCB temperature |
|
Storage Temperature |
-55 |
|
+115 |
℃ |
Ambient |
|
Temperature Coefficient |
|
|
±0.02 |
%/℃ |
|
|
Humidity |
20 |
|
95 |
%R.H. |
Relative Humidity, Non - Condensing |
Standards Compliance
|
Parameter |
Notes |
|
UL/cUL60950 |
|
|
EN60950 |
|
|
GB4943 |
|
|
Needle Flame Test (IEC 695-2-2) |
test on entire assembly; board & plastic components UL94V-0 compliant |
|
IEC 61000-4-2 |
|
Qualification Specification
|
Parameter |
Notes |
|
Vibration |
10-55Hz sweep, 1 min./sweep, 120 sweeps for 3 axis |
|
Mechanical Shock |
100g min, 2 drops in x and y axis, 1 drop in z axis |
|
Cold(in operation) |
IEC60068-2-1 Ad |
|
Damp heat |
IEC60068-2-67 Cy |
|
Temperature Cycling |
-40°C to 100°C, ramp 15°C/min., 500 cycles |
|
Power/Thermal Cycling |
Vin = min to max, full load, 100 cycles |
|
Design Marginality |
Tmin-10°C to Tmax+10°C, 5°C steps, Vin = min to max, 0-105% load |
|
Life Test |
95% rated Vin and load, units at derating point, 1000 hours |
|
Solderability |
IEC60068-2-20 |
Typical Application and Design Consideration
Typical application circuit
Figure 1: Typical application circuit (negative logic unit, permanently enabled).
|
designator |
Value |
Spec. |
|
C1～C5 |
1uF |
SMD1210-100V-X7R |
|
C6 |
100nF |
SMD1210-100V-X7R |
|
C8～C11 |
100nF |
SMD2220-1000V-X7R |
|
L1,L2 |
2.4uH |
ACM1211-701-2PL-TL01 |
|
C7 |
470uF |
Electrolytic capacitor(100V) |
|
C12 |
220uF |
Electrolytic capacitor(63V) |
Mechanical Outline
Notes:
1. All other pins are 0.040” (1.02mm) dia.
2. Tolerances: x.xx ±0.02 in. (x.x ±0.5mm)
x.xxx ±0.010 in. (x.xx ±0.25mm)
Pin Designations
|
Pin No. |
Name |
Function |
|
1 |
Enable |
TTL input to turn converter on and off, referenced to Vin(-), with internal pull up. |
|
2 |
Vin(-) |
Negative input voltage |
|
3 |
Vin(+) |
Positive input voltage |
|
4 |
Vout(+) |
Positive output voltage |
|
5 |
Vout(-) |
Negative output voltage |
|
6 |
Trim |
Output voltage trim. Leave TRIM pin open for nominal output voltage. |
Black Plastic 3FF Micro To Normal SIM Adapter , Micro 500pcs In A Polybag
Standard Plastic ABS Micro To Normal SIM Adapter For Cell Phone
Hot Selling Micro Sim to Standard Sim Adapter For Normal Mobile
Plastic ABS Nano SIM Adapter , IPhone 4 Nano SIM Card Adaptor
Black IPhone 5 Nano SIM Adapter With Nano 4FF - 3FF
Unique IPhone5 Nano SIM Adapter Plastic ABS Nano To Mini Card
4FF - 3FF SIM Adapter , Nano To Micro Sim Adaptor 500pcs In A Polybag
Plastic ABS 3FF Micro SIM Adapter For IPhone 4 Or IPhone 5
Nano Plastic 2 In 1 Combo Micro SIM Adaptor For IPhone 5 1.2 x 0.9cm
