Gaoxin Industrial Park,Guangming New Zone,Shenzhen City, Guangdong Province, China
Home ProductsSwitching Power Adapters

15VDC,0.8A POE Switching Power Adapter & Supply

15VDC,0.8A POE Switching Power Adapter & Supply

  • 15VDC,0.8A POE Switching Power Adapter & Supply
  • 15VDC,0.8A POE Switching Power Adapter & Supply
  • 15VDC,0.8A POE Switching Power Adapter & Supply
  • 15VDC,0.8A POE Switching Power Adapter & Supply
15VDC,0.8A POE Switching Power Adapter & Supply
Product Details:
Place of Origin: CHINA
Model Number: POE-A15008
Transmission Rate: 10M/100Mbps
Protocol Standard: Non-IEEE802.3
Payment & Shipping Terms:
Delivery Time: 3-30days
Contact Now
Detailed Product Description



Why choose 15V POE power adapter?

Most powered device require 12V power supply, the voltage of the supplying power will be drop at a distance of transmission via network cable. Usually, the voltage will drop to lower than 12V after over 10 meters delivering via network cable, which is just satisfied for AP working regularly. When the POE is 12V, the AP will be not in regular working due to under-voltage, on the contrary, the over-voltage will hit the device. So, taking all into account, 15V will be more appropriated especially for the powered device connected over 10meters far away.



General Specification:


Input:AC100-240V, 50-60Hz

Output:DC15V, 0.8A; 12W


Key Feature:

1. Good anti-interference performance (Strong resistance of interference), high reliability

2. Low DC ripple, high efficiency, low standby power consumption, lower heating value (calorific value), natural cooling, long service life

3. Broad input voltage range (100-240VAC), conform to multinational use standard.

4. Excellent insulating performance, higher dielectric strength (intensity)

5. Good load capacity, constant current & constant voltage, wider adaptive range, over-voltage protection for input and output, short-cut protection, over-current protection.

6. The shell is made of flame resisted engineering plastic, which greatly improve the equipment using safety

7. Transmission Distance/Operating Distance: Max.100 meters (CAT 5 or better cable). It specifically depends on the quality of network cable, supply voltage and adaptability of power device for voltage. The higher quality of network cable, the voltage drop will be less, and the effective power distance will be further accordingly.



Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)

Input Current: Max. 2.0Amps AC input at any input voltage below the rated value and DC output full load.

Inrush Current: Max. 30Amps cold start at 240VAC input, with rated load and 30℃ ambient output.

Ac Leakage Current: Max. 3.5mA at 240VAC input.


No Load Test 0A


15VDC,0.8A POE Switching Power Adapter & Supply 0


Full Load Test 0.8A


15VDC,0.8A POE Switching Power Adapter & Supply 1


Over Load Test 1A


15VDC,0.8A POE Switching Power Adapter & Supply 2



Output Power:


Min. Load

Max. Load

Peak Current

Output Power

15 VDC

0 A

0.8 A

1.0-1.2 A

12.2 W


Loading Characteristics/Regulation:


Min. No-Load


Max. No-Load


Line Regulation

Load Regulation

15 VDC

15.0 V

15.28 V




Technical Specification

Input Voltage/Frequency

AC100-240V; 50-60Hz

Input Adjusting Range

AC90-264V; 47Hz~63Hz

Output Voltage/Current

15VDC, 0.8A; 12W

Output Voltage Regulation


Load Regulation


DC Output Broadband Noise Voltage

3.4kHz~150kHz ≤50mv

Network Port Mark

Data&Power Out=Power pin (4/5 “+” & 7/8 “-”) + Data pin (12/36)

Data In=Data pin (12/36)

Transmission Rate


LED Power Indicator

Green or Blue Color;

Indicator On: Power in normal working condition;

Indicator Off: Power supply failure;

Note: When the power in normal working condition, after connecting network cable, the indicator off means it’s in over-load protection or shortcut status, it should be the requiring power of powered device is too high, network cable is shortcut or the powered device is broken.

System Reliability


Environmental Requirement

1. Operating Temperature: -10℃~40℃ (Full load, Normal operation)

2. Storage Temperature: -20℃to85℃, with shell.

3. Relative Humidity: 5%(0℃) ~ 90%(40℃) RH 72Hrs, Full load Normal operation.

4. Operating and Storing Place: Ventilation and heat dissipation, Clean, No conductive dust, No corrosive gas

5. Place of No dangerous of explosion

Safety Assurance

Conducted Emission(CE) and Radiated Emission(RE) compliant with EN60950, CE, FCC standard


83.5mm×47mm×53.7mm;  85g

Power Plug Specs

EU/US/UK/AU Plug are available

Lightning Protection

AC Input can stand 5 times positive & negative 5KV, 8/20uS instantaneous current wave, lasting 1 minutes each time. The lightning protection circuit of the power adapter have invalidation alarming function and protective components like glass protective tube


This is ordinary switching power supply, great protective performance, superior stability and adaptability connecting with power device, its scope of application include security surveillance, wireless access point, electrical machine, communication equipment, health care products and those POE supported equipment.


One year


Contact Details
Shenzhen YONP Power Co.,Ltd

Contact Person: Miss. Angel

Tel: 1598940345

Fax: 86-755-3697544

Send your inquiry directly to us (0 / 3000)

Other Products